Modular, full capability EMC test systems for surge, fast transients and power quality. Includes Windows software and virtual front panel operation, AC Mains current monitoring, data logging and is easily switched to apply different types of pulses to the equipment under test. All ECAT systems with two or more modules are discounted 20% from individual module prices.


ECAT Systems

These are a few of our most popular ECAT configurations. They can be modified by exchanging or adding the modules listed below.

Part #
 Description Modules Included Technical Standard
E1000-4-4 Fast transient generator to 4.4kV with coupler E103, E412 IEC 1000-4-4
EN 50082
E1000-4-5-3 Combination wave surge to 6.6kv with 3 Phase coupler E103, E501, E4554 IEC 1000-4-5
ANSI C62.41
E1089 Bellcore 2x10 and 10x1000 telecom surge generator E103, E506-4W E509 GR-1089-core


Series 500 Surge Modules

These plug-ins to the E103 ECAT Controller generate the waveforms defined below. The first number (1.2) is the rise-time, the second(50) is the fall-time, both in microseconds. Current is given when defined by the standard.

Part # Description Waveform V/I Technical Standard
E501 Combination wave 2&12 ohm V=1.2x50 to 6600v I=8x20 to 3300a IEC 1000-4-5, ANSI C62.41
E502 Telecom wave V=10x700 or .5x700 to 6000v FCC part 68 CCITT K.17
E503 100kHz Ring wave I=200 or 500 V to 6600v IEC 1000-4-12 ANSI C62.41
E504 Combination Wave V=1.2x50 to 6kv I=500 or 750 UL1449
E506-4w Bellcore lightening surge 2x10 to 5000v, 500a GR-1089-core
E508 Bellcore lightning surge V=10x360 to 1000v, 100a GR-1089-core
E509 Bellcore lightning surge 10x1000 to 1500v, 100a GR-1089-core
E510 Combination wave 2&12ohm V=1.2x50 to 10kv I=8x20 to 5ka UL864
E513 Voltage ramp surge 100v/us, 500v/us, 1kv/us 5kv/us, 10kv/us to 3000v UL864


Series 400 EFT Modules

These plug-ins for the E103 Controller generate EFT pulse bursts of 5ms/50ns to meet national and international standards, including IEC 1000-4-4. Some include coupler/filters.

Part # Description Coupler/Filter Max Voltage
E411 EFT generator, 50 ohm output imped. not included 4.4kV
E412 EFT generator, 50 ohm output imped. 250v/16a single phase 4.4kV
E421 EFT generator, 50 ohm output imped. not included 8kV
E424 EFT generator, 50 ohm output imped. 480v/32a three phase 4.4kV


Coupler/Filter Modules

These modules are required to couple the surge onto the power line. The E551 can be used only with Series 500 modules; the rest with both surge and EFT modules. All include built-in voltage and current monitors and coupling modes under complete software control.

Part # Description Max. EUT voltage/current
E551 Sure Coupler/Filter - single phase 250V/16A
E4552-DC E4552 plus DC power option 277V/32A
E4554 Surge and EFT coupler - three phase 480V/32A
E4554-HV Surge and EFT coupler - three phase 600V/32A


Other Modules and Accessories

Part # Description
E103 Controller for ECAT system with front panel and software operation
EP62 Plug-in provides swells, dips and interrupts (PQF) on power mains per IEC1000-4-11
CCL-4/s Capacitive coupling clamp for testing I/O and data lines per IEC1000-4-11