EM Test
EM Test is the leading manufacturer of automotive test equipment. With membership in various national and international standard working groups EM TEST knows the present and the future demands of the car industry. Transient Specialists works closely with EM Test to provide compliant, reliable test equipment to meet a large majority of the most current automotive standards. All of our EM Test equipment is ISO 17025 calibrated.
In addition to the automotive test equipment, Transient Specialists carries their all-in-one compact box for conducted EMI testing per the IEC 61000-4-x series of tests, conducted RF testing and their light, portable ESD simulator.
EM Test products for rent from Transient Specialists
| Part # | Description | Testing Standard |
|---|---|---|
| LD 200N | EM Test load dump generator for high energy pulses with durations of 100's of milliseconds | SAE J1455, J1113, JASO, ISO 7637 including waveform 5a |
| LD 200N CLD | Same as above, with Clipped Load Dump | ISO 7637 5b |
| UCS 200N | EM Test EFT and microburst Generator with coupler | SAE J1455, J1113, JASO, ISO 7637 including waveforms 1, 2a, 3a, 3b |
| VDS200N15 | EM Test power supply and dips test set, Device under test power to 15 amps | SAE J1455, J1113, JASO, ISO 7637 including waveforms 2b, 4 |
| VDS 200N30 | EM Test power supply and dips test set, Device under test power to 30 amps. | SAE J1455, J1113, JASO, ISO 7637 including waveforms 2b, 4 |
| Autowave | 4 channel arbitrary generator and 2 channel transient recorder for use with the VDS 200, with a library of standard test routines | BMW, Toyota, SAE J1113-2, GMW 3172 |
| ACC | Capacitive coupling clamp - automotive | 3b |
| CA ISO, CA EFT | Verification devices for the LD200n and UCS 200n | 1,2a,3a,3b,5a,5b,7 |
| UCS 500N5 | EM Test unit with EFT to 5.5kv, Bi-wave to 5kv, and 300v/16a AC coupler, 300v/10a DC | IEC 61000-4-4,5 |
| UCS 500N7 | EM Test unit with EFT to 5.5kv, Bi-wave surge to 7kv 100khz ringwave to 6000v, 300v/16 a single phase AC coupler, 300v/10a DC | IEC 61000-4-4,5, 12, ANSI C62.41 |
| V4780 S2 | Auto tapped transformer for use with the UCS 500N7 for Dips testing to 16 amps | IEC 61000-4-11 |
| CWS 500N1 | Conducted Immunity test set including 9khz to 1Ghz signal Generator, 80 watt amplifier from 100kHz to 300Mhz, Power meter external CDN and attenuator | IEC 6100-4-6 |
| CWS 500N2 | Conducted RF susceptibility test set for DO160 sec. 20, CS114 Incl: F-120-6A injection probe, Attenuators, and 50 ohm resistor | DO160 s20, CS114 |
| CDN-M2/3/16A | 240VAC, 16A coupler for use with the CWS500N | |
| CDN-M5/32A | 400VAC, 32A coupler for use with the CWS500N | |
| EM101 | EM Clamp .15 to 1,000 MHz, 100W max. | |
| dito | EM Test ESD Simulator to 16.5kv air, 10kv contact mode, 150pf/330 ohm network | IEC 61000-4-2 |