Contact Us
Keytek ECAT E509A - Bellcore GR-1089-CORE 10/1000us Network
Availability:
In Stock - Order By 3PM Ships Today!
Keytek ECAT - Test Accessories
Description
Three-Terminal Telecom 10/1000us Module Features:
- Bellcore GR-1089-CORE Test Solution
- ISO 17025 Calibration Included
- 10/1000us 600V, 1kV, & 1.5kV Generator
- Can Be Rented w/without E103 System
- Free Technical Support & 2 Days Free Transit
- Must be Used with ECAT E103 Controller
Get fast deliveries on a variety of speciality pulse generators including 10us/700us and telecom pulse test systems. We offer rentals of the both modules and complete ECAT systems allowing for easily adding onto existing capabilities.
Specifications
|
E509 Telecordia Lightning Surge for ECATS |
|
|
Standards |
GR 1089-CORE |
|
Open Circuit Voltage Waveform |
10/1000µs,50-600V -0/+15% peak 10/1000µs,50-1000V -0/+15%peak 10/1000µs,50-1500V -0/+15%peak |
|
Short Circuit Current Waveform |
100A/side -0/+15%peak |
|
Duration |
-0/+50% for Voltage |
|
Front Time |
-30%/+0 for Voltage |
|
Pulse Repetition Rate |
1 shot/40 seconds |
|
Weight |
16kg, 35 pounds |
|
Dimensions |
21x42x52 cm, 8x16x20 inches |
ECAT Series
Common Modules
ECAT Series Full Accessory
| Item | Capabilities |
| ECAT Model E411 | EFT/Noise Burst simulator for testing in accordance with IEC 61000-4-4 Edition 2 to 4.4kV |
| ECAT Model E412 | EFT/Noise Burst simulator with built-in, single phase AC mains coupler/decoupler for testing in accordance with IEC 61000-4-4 Edition 2 to 4.4kV. Model E412 features all specifications and options noted in Model E411 (above), as well as the following: |
| ECAT Model E421 | FT/Noise™ Burst Simulator for IEC 61000-4-4 Edition 2 to 8 k |
| ECAT Model E501B | Plug-in combination wave surge simulator to produce the combination waves required by IEC 6100-4-5, ANSI/IEEE C62.41 Cat. B and UL 1449 at 3kA |
| ECAT Model E502B | Plug-in module to produce the telecommunications surge wave required by IEC 61000-4-5, FCC Part 68 and ITU Rec K.17, K.20, and K.21 (formerly CCITT |
| ECAT Model E503 | Plug-in module to produce the ring waves specified by ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864 |
| ECAT Model E504A | Plug-in module to produce the combination wave required by UL 1449 (some devices must also be tested using the E501A surge module) |
| ECAT Model E505A | Plug-in module that produces the lightning surge waveforms required by FCC Part 68 |
| ECAT Model E506-4W | Plug-in module to produce the 2/10 µs surges required by Telcordia GR-1089 CORE for up to five-wire (four terminal) testing |
| ECAT Model E508 and E508-12P | Plug-in modules to produce the 10/360 µs surges required by Telcordia GR-1089 CORE |
| ECAT Model E510A | Plug-in module to produce combination wave specified by ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5 to 10kV and 5kA |
| ECAT Model E511 | Plug-in module to provide combination waves to 6 kV and 5 kA, as required by British Telecom standards |
| ECAT Model E513 | Plug-in module to produce voltage ramps for testing surge protection components such as gas tube arrestors; meets surge simulator requirements of UL 864 |
| ECAT Model E514 | Surge simulator for 10/1000 µs current waves |
| ECAT Model E515 | Module to produce the 10/250 µs surges required by Telcordia GR-1089-CORE |
| ECAT Model E518 | Plug-in module to produce the 10/1000µs waveforms to 2kV as required by Telcordia GR-1089-CORE for both Lightning Surge and Protection Coordination. Includes HB-ECAT |
| ECAT Models E521 and E522 | Surge systems that produce the high voltage, high current combination waves required by ANSI standards for service entrance and outside connected electronics; meets requirements of IEC 61000-4-5 for all exposure categories. ECAT Model E521 includes built-in AC coupler/decoupler for singlephase lines to 480V, 32A; ECAT Model E522 includes built-in AC coupler/decoupler for three-phase lines to 480V, 32A/phase (actual AC mains current per AC line connector limits). |
| ECAT Model E551 | A single-phase AC line (power lines) coupler/decoupler for surge waves, as specified by IEC 61000-4-5 |
| ECAT Models EP61 and EP62 | Plug-in modules provide swells, dips and interrupts on AC power mains in compliance with, and exceeding the requirements of IEC 61000-4-11 Edition 2. Model EP61 for single-phase AC lines to 240 RMS, 16A; Model EP62 for single-phase AC lines to 240 RMS, 32A |
| ECAT Model E455x | Single and three-phase AC line coupler/decouplers for EFT and Surge waves, as specified by IEC 61000-4-4 Edition 2 and IEC 61000-4-5 |
