Description
2-Quadrant Voltage Drop Simulator
- Programmable DC Voltage & Current Supply
- Laptop & ISO 17025 Calibration Included
- Max current & Voltage: 50Amp / 80Volts
- High Bandwidth up to 150 kHz & Fast Rise Times
- Free Technical Support & 2 Days Free Transit
- Rent with EM Test Autowave & PFM200N100
- Turnkey Solution - Arrives Ready for Testing!
Overview
The EM Test VDS 200R series of automotive batter supply/voltage drop simulators is the newest model replacing the VDS 200N series. It offers many of the same capabilities and uses the same EM Test iso.control software system for remote use. This system is ideal for both OEM and international standard requirements for automotive battery supply transients. We offer rentals of both the 15amp (VDS 200N15) and 30amp (VDS 200N30) test solutions which can be used independently or integrated into an complete EM Test system. This piece of test equipment comes with an ISO 17025 accredited calibration and a laptop with software installed, providing a quick solution.
Data Sheet
Specifications
Common Standards |
ISO 7637-2 pulses 2b & 4, ISO 16750-2, SAE J1113-11 and many others |
Output Voltage |
0 Volts to +60 Volts |
Output Current |
0A – 50A, continuous |
Peak Current |
50 A for 200 ms |
Frequency Range |
DC to 150 kHz full signal |
Supply Voltage |
1-phase 100/120/230V +/- 10% (L, N, PE) |
Weight |
230kg |
Dimensions |
19"/25 HU* |
COMMON DATA (ALL MODELS) |
|
Operation |
2- quadrant, Bipolar operation |
Source impedance |
Zi Programmable =<10mohm, |
Recovery |
>90% of excursion within 25 us |
Output rise time |
typ. < 3 us |
Ripple voltage |
UR <10 mVp-p, frequency min. 400 Hz |
Control |
Analog In |
TRIGGER |
|
Automatic |
Automatic release of the events |
Manual |
Manual release of a single pulse |
External |
External release of a single pulse |
OUTPUT |
|
DUT Supply +/- |
Safety laboratory or high current connectors |
Ext. trigger |
5-15V TTL; BNC connector |
CRO Trigger |
5V TTL-signal for oscilloscope |
TEST ROUTINES FOR ARBITRARY WAVES |
|
DC source |
Depending on VDS 200R model |
Functions |
Sine Wave Sweep Sine Wave (Cranking) Clipped Load Dump Jump Start GM 9105P Pulse 4 Drop and Jump pulse External |
Standard Test routines |
ISO 7637, Pulses 2b and 4 ISO 16750-2 |
Service |
Service, Setup, Self test |
INTERFACE |
|
Serial interfaxe |
USB |
Parallel interface |
IEEE 488, addresses 1 - 30 |
Remote control |
To connect an external signal generator (10kohm): 0-10V / 0-50kHz max. 0.5V(p-p) / 0-100kHz |
Packing List/Accessories
Included with Rental
Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping. The laptop that comes with the battery supply generator also come with ISO control software allowing for a quick, turnkey solution.
VDS 200R
- Battery Simulator/Generator
- Power Cable
- USB Interface Cable
- Printed Manual
- Calibration Documentation
- Short Introduction
- USB Drive with License & Software
- 125V Plug
- (2) MC Connector Cable (red & black)
- (2) Clamps Red & Black
- Red Shipping Case
VDS 200 Series
VDS 200Q Series |
|
VDS 200Q10 |
Voltage Drop Simulator, 60V/10A |
VSD 200Q25.2 | Voltage Drop Simulator, 80V/25A |
Voltage Drop Simulator, 80V/50A | |
VDS 200Q100.2 |
Voltage Drop Simulator, 80V/100A |
VDS 200Q150.2 |
Voltage Drop Simulator, 80V/150A |
VDS 200Q200.2 |
Voltage Drop Simulator, 80V/200A |
VDS 200R Series |
|
VDS 200R25 |
Voltage Drop Simulator, 60V/25A |
VSD 200R50 | Voltage Drop Simulator, 60V/50A |
VDS 200R100 |
Voltage Drop Simulator, 60V/100A |
VDS 200N Series |
|
VDS 200N10 |
Voltage Drop Simulator, 60V/10A |
Voltage Drop Simulator, 60V/15A | |
Voltage Drop Simulator, 60V/30A | |
VDS 200N50 |
Voltage Drop Simulator, 60V/50A |
VDS 200N100 |
Voltage Drop Simulator, 60V/100A |
VDS 200N150 |
Voltage Drop Simulator, 60V/150A |
VDS 200N200 |
Voltage Drop Simulator, 60V/200A |
Video
EM Test - Automotive Conducted Immunity Generators
Description: This video provides an overview on the EM Test conducted immunity test system. The three major components of this automotive EMC test equipment are the LD 200N, UCS 200N, and VDS 200N. This video provides and overview of these test systems including, ISO 7637-2 waveforms covered, accessories that come with equipment, setup, connecting all equipment, and troubleshooting. It also, provides insight into how to setup the software to allow remote testing to be conducted through laptop.
Standards
Widely Used Standards
This list is a more comprehensive list of all the standards covered with this automotive load dump generator. This is by no means all the standards covered, but the major ones from the largest manufacturers and most widely used standards.
- Audi (Reference vehicles)
- BMW - (Airbag ECU)
- BMW 600 13.0 (Part 1)
- BMW 600 13.0 (Part 2)
- BMW GS 95002 (1999)
- BMW GS 95002 (2001)
- BMW GS 95003-2
- BMW GS 95024-2-1
- Case New Holland ENS0310
- Chrysler CS-11809 (2009)
- Chrysler CS-11979
- Chrysler PF-9326
- Cummins 14269 (982022-026)
- DaimlerChrysler DC-10615
- DaimlerChrysler DC-10842
- DaimlerChrysler PF-10541
- DIN 72300-2
- EN 300329
- EN 300340
- EN 300342-1
- EN 301489-1
- EN 301489-17
- EN 301489-24
- EN 301489-7
- FAW Diesel ECU MY06.0 (Rev.7)
- Fiat 9.90110
- Ford EMC-CS-2009.1
- Ford ES-XW7T-1A278-AB
- Ford ES-XW7T-1A278-AC
- Ford WDR 00.00EA
- Freightliner 49-00085
- GM 9105P
- GMW 3097
- GMW 3097 (2001)
- GMW 3097 (2004)
- GMW 3097 (2006)
- GMW 3100
- GMW 3100 (2001)
- GMW 3172
- GOST 28751-90
- Honda 3982Z-SDA-0030
- Hyundai/Kia ES 95400-10, Rev. D
- Hyundai/Kia ES 96100-02 (2006)
- Hyundai/Kia ES 96200-00
- Hyundai ES 39110-00
- ISO 21848:2005
- ISO 14982
- ISO 16750-2
- ISO 7637-1:1990
- ISO 7637-2:1990
- ISO 7637-2:2004
- ISO 7637-2:2011
- Iveco 16-2103 Rev.15 (2010)
- Jaguar CI 265
- Jaguar EMC-CS-2010JLR V1.1 (2011-01)
- JASO D001-94
- John Deere JDQ 53.3
- Kia/Hyundai ES 95400-10
- Mack Trucks 606GS15
- MAN 3285
- Mazda MES PW 67600
- MBN 10284-2
- MBN 10615
- MBN 22100-2
- MBN LV 124-1
- A 211 000 42 99
- AV EMV
- Mitsubishi ES-X82010
- Nissan 28400 NDS 02
- Nissan 28400 NDS 03
- Nissan 28401 NDS 02
- OEM LV 124
- Piaggio 7431 (Edizione 5, 2009-07)
- Porsche
- prEN 50498 (2008)
- PSA B21 7090
- PSA B21 7110
- Renault 36.00.400/B
- Renault 36.00.400/C
- Renault 36.00.808/--D
- Renault 36.00.808/--E
- Renault 36.00.808/--F
- Renault 36.00.808/--G
- Renault 36.00.808/--H
- Renault 36.00.808/--J
- Renault 36.00.808/--K
- SAE J1113-11
- SAE J1113-11 (rev.2000)
- SAE J1113-11 (rev.2007)
- SAE J2628 (2007)
- Scania TB1400
- Scania TB1700
- Smart DE1005B
- Tata TST/TS/WI/257
- Toyota TSC3500G
- Toyota TSC3590G
- Toyota TSC6203G
- Toyota TSC7001G
- Toyota TSC7006G
- Toyota TSC7021G
- Toyota TSC7034G
- Toyota TSC7203G
- Toyota TSC7306G
- Toyota TSC7544G
- Volvo EMC Requirements (1998)
- Volvo EMC Requirements (2002)
- Volvo STD 515-0003
- VW 80000
- VW TL 801 01
- VW TL 801 01 (2003)
- VW TL 820 66