EMI Test Systems – Military Standards

These products test pulse susceptibility of equipment in accordance with Military and Aviation standards. They are available individually or with the accessories required to comply with these standards.

MIG2000-6

HV Technologies’ for Military Standard 461

Part # Description Testing Standards
MIG2000-6 CS115-2x30 nanosec. waveform, CS116-10khz/100khz/1Mhz/10Mhz/30Mhz/100Mhz, Includes the CN-MIG-BT and CN-MIG-BT2 injection probes, the Veri-MIL2 calibration fixture and attenuators Mil. Std. 461
CS115, CS116

EMCMIG-2000-6.pdf

Solar EMC Products for Military Standards

Part # Description Testing Standards
2854-1 Spike generator to 600 volts, 1.5µsec rise time, 3.5 µsec. duration MIL-STD 461F
CS106
9354-2 Universal Transient Generator with 6 damped Sinusoidal waves to 3200 volts incl: 10kHz, 100kHz, 1MHz, 10 MHz, 30MHz,100 MHz, 3 double exponential: 6.4µs, 70µs, 120 µs MIL-STD 461 D&E
CS116
DO160D, sec 22
CS-116 acc Accessory pack for MIL-STD-461D, CS116 Testing incl: 9335-2 coupling clamp, 9841-1 50 ohm load, 9142-1N, 9123-1N, 9410-1,9454-1 – High voltage attenuators 9125-1, 9357-1 calibration fixtures CS116, CS115 CS114
9355 Pulse generator 2x35 nanosec. to 2kv CS115
8282-1 Conducted transient susceptibility, .15 µsec, 5 and 10 µsec. To 600V MIL-STD 461 B/C
CS06
8850-1 pkg. Power sweep generator with 7021-1 phase; Shift network MIL-STD 461
CS01/CS101
7399-2 Spike generator to 2500 volts, 90 µsec MIL-STD 1399
7054-1 Spike generator to 600 volts, 10 µsec DO160 sec.17
MIL-STD 462 CS06
2201-1 Transformer for use with 7054-1 generator DO160 sec. 17
6220-4 H-V Audio Isolation Transformer DO160E, sec. 18,22
7032-1 Power Line Isolation Transformer MIL-STD 461-CS06
MIL-STD 1399
6512-106R 10 µfarad Feed Thru Cap (qty 2) DO160 sec. 18,20,21
9233-50-TS Line Impedance Stabilization Network MIL-STD 461, CS101, 114, 115


Solar Equipment EMC 7054.pdf Solar Equipment EMC 7399.pdf

Solar Equipment EMC 9354.pdf Solar Equipment EMC 9355-1.pdf

EM Test for Military Standard 461

Part # Description Testing Standards
CWS 500N2 Conducted RF Immunity test set including 10khz to 1Ghz signal generator, 100 watt amplifier from 10khz to 400Mhz, Power Meter, accessories needed for Mil Std 461, CS114 testing including injection probe, calibration fixture, attenuators Mil Std 461, CS114


EM Test 500N2