Description
Overview
The EMC Partner MIG-OS-OS1 pulse generator with the CDN 2000-6-25 allows for testing for damped oscillatory waves with frequencies of 100 kHz and 1 MHz, comparable to the NSG 3040 SW. An ISO 17025 accredited calibration comes standard with the rental. This products easy to use software allows for quick and easy testing and changing of parameters. This test solution is ideal for testing to a variety of damped oscillatory testing including ANSI C37.90, IEC 61000-4-18, IEC 60255-22-1, and many others.
MIG-System Data Sheet User Manual - MIG-OS-OS1Specifications
Common Standards |
EN/IEC 61000-4-18 |
1 MHz, 100kHz IEC Damped Oscillatory: |
|
Standard: |
IEC 61000-4-18, IEC 60255-22-1 |
Voltage Peak open circuit |
250V – 10% to 3kV + 10% |
Voltage Risetime |
250V – 10% to 3kV + 10% |
Output Impedance |
200 Ω ± 20% |
Decay |
50% of peak value between 3rd and 6th period |
Burst Duration |
1 up to 99 s ± 10% |
Repetition rate maximum |
400/s for 1MHz, 40/s for 100kHz |
1 MHz ANSI / IEEE Damped Oscillatory: |
200 Ω ± 20% |
Standard: |
ANSI / IEEE C37.90.1 |
Voltage Peak open circuit |
250V – 10% to 3kV + 10% |
Voltage Risetime |
50 – 100 ns Rise Time |
Oscillation Frequencies |
1MHz – 1.5MHz |
Output Impedance |
150 Ω ± 20% |
Decay |
50% of peak value after 6 µs |
Burst Duration |
1 up to 99 s ± 10% |
Repetition rate maximum |
400/s for 1MHz, 40/s for 100kHz |
Weight – MIG-S-OS1 |
28kg, 62 pounds |
Dimensions – MIG-OS-OS1 |
45x57x38cm, 17x22x15 inches |
Burst Duration |
1 up to 99 s ± 10% |
Repetition rate maximum |
400/s for 1MHz, 40/s for 100kHz |
Weight – MIG-S-OS1 |
28kg, 62 pounds |
Packing List/Accessories
Included with Rental of Damped Oscillatory System
Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping.
MIG-OS-OS1
- MIG Unit
- Power Cord
- MIG Aux Keeper
- USB Stick with Software & Manual
- Printed Manual
- Calibration Documentation
- 25 Pin to 9 Pin
- 9 Pin serial to USB Cable
- Case
Standards
Widely Used Standards
This list is a more comprehensive list of all the standards covered with this automotive load dump generator. This is by no means all the standards covered, but the major ones from the largest manufacturers and most widely used standards.
- IEC 60255-4
- IEC 6055-22-1
- IEC 61000-4-10
- IEC 61000-4-18
- IEC 60834-1
- VDE 435 Teil 303